Our Products Range:

Vigor Tech is the leader of angle measurement field.

We always supply the advanced and good performance tilt sensors to the construction machinery.

1) Static Inclinometer--20 types, it has good ability to resist vibration filter and suitable for measuring in static.

2) Quasi-Dynamic Inclinometer--8 types, it's suitable for measuring under affection on continuous acceleration.

3) Dynamic Inclinometer--5 types, it's suitable for measuring in dynamic slope.

4) More than 4 types Inclinometer can stand 400g impact.

5) More than 3 types Inclinometer are suitable for applying to the inside of drill pipe.

Basing on our many years experience, we think the important premise for achieving high safety is that can accurately measure the angle by tilt sensor under emergency.

SST20 inclinometer based on Vigor's advanced tilt measurement technology, to meet with low cost, high reliability and volume application, performs high performance-cost ratio.
SST20 employed most universal & mass-produced components, casting aluminum alloy house, universal high reliability M12-5pin industrial connector; full epoxy seal with IP69K protection, auto-test/calibration equipment which not only ensure delivery speed, also keep the consistency of goods.
Thanks for Vigor engineers, they adopt advanced technologies as:
- CAE/EDA simulation;
- Modal test for both housing and PCB to eliminate resonance due to vibration;
- Comprehensive performance & function test for component & firmware;
- Calibration technology based on SST300 high accuracy inclinometer;
- Refer MIL/ EN/ ISO/IEC standards to enhance SST20 durability & reliability.
SST20 support remote diagnosis without disassembling. MTBF more than 10 years per time. Can work in 10m submersible depth long time and has better EMC ability.
SST20 output RS485/CAN/CANOpen and Voltage/Current signals. Better power management to meet with automotive /truck/vehicle application without regulated power.
OEM service is available with calibrated PCBA or MIL qualified.

Features 
- Low cost, high performance, suitable for batch application 
- 50Hz refresh rate, 10Hz response frequency 
- ±0.07°accuracy@-15~50℃ 
-±0.2% cross-axis error 
- Available to horizontal, vertical, headstand, etc installation methods 

- IP67protection 
- 9~36VDC power supply 
- Sensing elements survive to 1500g shock while operating 

Applications 
Vessel, Engineering machinery, Solar/wind energy, automobile/truck/vehicle, Communication/electric Tower monitoring, High-voltage pylon monitoring, Antenna, construction engineering, Landslide, etc